PRODUCTS

Rear wipers

Maximum safety and security for the driver, implies high quality wipers both on the rear and front wind screen, especially in the Scandinavian climate. Therefore we use the same high quality material for both rear and front wipers which is unique on the market.

Maintenance

The rubber in a wiper blade is exposed to different types of weather; rain and temperatures, and it is sensible to extreme heat or cold. For safety reasons, just like other car accessories exposed to friction, wiper blades should regularly be changed. How often you need to replace them depends on the usage frequency and weather conditions.

Our recommendation is to change wipers at least twice a year, preferably at the same time as you change tyres for the winter/spring season.

A very convenient place where you can change wipers is the tyre workshop or garage which is a natural provider of Xwipers. The tyre workshop has the knowledge and skills required in order to provide the right tyres and wiper blades for your individual car.

Xwipers are easily fitted with a multi adapter attached to the blade, or with an alternative adapter included in the package.

To protect your wipers and to extend their performance durability we recommend that you clean them regularly with a textile cloth. This is to get rid of smudge and particles which may scratch your wind screen.

The Natural rubber material in Xwipers have a Teflon coating for extra performance, but they will last even longer if you use washer fluid. When blades freeze and stick to the wind screen during cold and icy weather conditions, we suggest that you use the defrost function of your car in order to release them from the screen.

FITTING

Remove the old blade

1. Pull the end of the wiper arm outwards from the screen.
2. Push the small tap on the adapter thereby releasing the lock between the wiper blade and the arm. You will then hear a minor “click” sound.
3. For all standard wiper blades: press the tap on the adapter at the same time as you press the blade downwards towards the arm attachment. This is to release the wiper blade thereby enabling you to easily remove the arm from the blade.

Fit a new wiper

1. Pull the hooked top of the wiper arm through the centre of the wiper blade, and place the hook around the plastic adapter located on the centre of the wiper blade.
2. Push the wiper blade towards the hooked part of the wiper arm until the attachment on the blade attaches the wiper arm.

Flat blade models

XWH - seal the attachment with the cover
XWP – in some cases the cover has to be removed before attaching the blade on the tap, thereafter, attach the cover with a “click”.
XWG – slide the wiper on to the wiper arm and make sure the attachment is ok.
XWV – push the blade into the wiper arm attachment until you hear a clicking sound.
XWF - push the blade into the wiper arm attachment until you hear a clicking sound.